orange peel pincushion tutorial

It's been a while since I put out a free pattern or tutorial, and I know how you all just love freebies...so here is a goody for you. This idea came to me last Friday when I was walking home from dropping my daughter off at school. I love orange peels and cathedral windows, and this is a combination of those. I made (4) one-inch scrappy (foundation paper pieced) diagonal blocks, basted two pieces of same-sized squares folded on top and sewed all four blocks together. I threw on a couple of borders, sewed some lovely Robert Kaufman Essex Yarn Dyed Linen in black on the backside, filled with cornmeal, finished off with a ladder stitch and there you go. BOOM!

If you didn't quite understand all of that, we'll go through this step-by-step. I love pictures and hope there are enough for you to understand where this is going.

Materials Needed:

Various rainbow scraps for diagonal blocks
(8) 1 1/2" x 1 1/2" Low Volume fabric squares for windows
(2) 1" x 2 1/2" purple fabric strip for border
(2) 1" x 3 1/2" purple fabric strip for border
(1) 3 1/2" x 3 1/2" backing fabric
about ½ cup or 100 grams of small grain or filling 
such as crushed walnut shells, cornmeal or grits
(4) 1-inch diagonal strip block templates for foundation paper piecing. You can make your own or download the complete pattern found on Etsy.
Hand sewing needle & thread 

• Makes one, three-inch pincushion. 
• Knowledge of foundation paper piecing is required. 
• Knowledge of how to make a pincushion can be helpful as well as a ladder stitch. 
• Please use a scant 1/4 inch seam allowance when sewing. 
• Reduce your stitch length to 2.0 or 1.5 to allow for easier paper removal and better endurance.

Let's get started....

Cut out four templates from the one-inch diagonal strip blocks template sheet free for download.

Make four blocks in four different colorways using the fpp templates. I chose yellow, red/orange, greens and blues. Make sure you overlap the seam allowance on the foundation paper with ample fabric. You can always cut off the extra.

Trim up your one-inch blocks using the seam allowance guide on the back, a good ruler and rotary cutter. (My, oh my, how those blocks look so much cuter when they are squared up.) Take your papers out now. (I left mine in.)

Take all eight (8) 1 1/2" x 1 1/2" squares and fold them in half diagonally. Press with a warm iron. 

Place one folded square (now a triangle) over each foundation pieced block as shown below.

Place the second triangle over the block and baste using a 1/8th seam allowance. Please be very accurate in this step. If you are not, the windows might not line up on all four blocks. (The blue and green diagonal strip blocks are swapped in this foto. I just wanted to see if you were paying attention.)

Once all four blocks are basted, connect two blocks. Press seam open or to one side. Sew the other two blocks together and then connect to make a four patch. Attach borders.

Open your windows and pin in place. Now doesn't that look pretty!!?? 

NOTE: You could put a little piece of fabric in the middle to make a Cathedral window.

Still using a stitch length of 2.0 to 1.5, top stitch the windows in place.

Layer your backing fabric and pincushion top right sides together (RST). Sew around the outside leaving a two inch gap along one side to flip. Trim corner at a 45° angle to get a sharp corner. Flip. Thread a hand needle with a color matching your backing fabric. 

Sorry - NO FOTO for this step! I was sewing instead. : )

 

Start to sew the seam shut. Using a small funnel, fill your pincushion up with the small grain filling. I used (organic) cornmeal, because if flows through my funnel easily and has the right grain size.  Continue to sew the seam shut and filling with more grain. All finished.

You also can make a classic orange peel like this:

Or you can make all kinds of other variations such as only using one triangle per block.

 

Or flip the block around to make a pinwheel.

I would love to see what you can come up with. Please post your photos on Instagram so we all can see. Use the hashtag #eporangepeelpincushion. Or drop me an email. 

If anything is unclear, please feel free to drop me a note, and I will try to make it clearer for all.  

 
Thanks for dropping by! Happy sewing! Feel free to look around. I have a lot of other tutorials and freebies here on my blog.

sew pixel play pincushion tutorial

Hi Everyone!

If you don't already know me, my name is Karen. I studied International Business with an unofficial minor in German. After working a few years in Germany as a productions planner/controller/analyst, I tied the knot and opted for the simpler life as a mom. I now live in southern Germany with my bi-national family close to Ulm which is between Stuttgart and Munich (or closer yet, Augsburg). I do not have the opportunity to talk too much to other Americans, since I am totally integrated into the society and don't live in a major city where other Americans live. So, I use my blog, website and Instagram account to keep my English active. I discovered my passion for "patchwork" over a decade ago and have been trying to learn every technique known in the quilting world since then; I love learning! Some of you might know me as a mini quilter, but I truly love all techniques, as well as traditional and modern quilting.

I have been posting lots of pictures lately on Instagram of a technique that I have been using on pincushions, mug rugs, and pillows that I call "sew pixel play." A lot of your have been asking how I do it. This is actually a very old technique. I am very happy to be bringing it back again, because it brings up so many new possibilities.

First, let me tell you how I learned about it... I had always seen gridded fusible fleece in the stores for sale and wondered about it. I remembered seeing a video or demonstration about adhering squares to the fleece and sewing in rows with one long seam. I couldn't really understand why someone would use this technique, because I thought this was just too time-consuming for "normal" chain piecing rows together. So this technique logically didn't fit into my repertoire. At this time, I was also participating in the Doll Quilt Monthly swap and wanted to learn more about miniature quilts. Then I found this fantastic book by Paula Doyle called Mini Mosaic Quilts. It re-explored this technique and used it for making small, miniature quilts. Since then, I have been incorporating it into my patchwork when I can break down a design into pixels or squares. For sewing on a small scale, this technique is quick and extremely accurate. Some of you may know this technique as "Quick Piece Tiny Squares" or "Using a Quilter's Grid." Since I do it usually on a small scale to get my seams perfect; I call this technique "Sew Pixel Play."

Now onto the step-by-step tutorial for making a pincushion using this technique.

You will need the following materials in addition to your basic sewing notions:

• Lightweight scraps

• Gridded fusible fleece

• or graph paper + glue stick 

• or waxed paper + ruler + pencil

• Small grain for filling the pincushion + funnel

For the pincushion, I used the one-inch fusible grid. I prefer to use waxed paper and draw lines on the rough side with a regular pencil and ruler. Although this is more time consuming, it is more accurate when you crease your lines. You may also use regular paper and a glue stick. Draw your own grid at one-inch intervals or print out from EQ7. Make sure you are accurate when you crease along the lines. Use a good light source.

Cut 7/8 inch squares

• 5 white
• 5 magenta
• 5 dark green
• 4 light green
• 4 red
• 4 pink
• 4 purple-blue
• 5 single misc. colors

Cut one backing fabric 3 1/2 inches.

Cut fleece or prepare your paper to get a 6 x 6 grid. No need to worry about added seam allowance; it is already included in the one-inch squares.

Lay out your squares onto your fleece making sure you have the fusible side up! You will not be able to see the lines very well. If you are using waxed paper, your lines will be on the backside. If you are using paper/glue stick, your lines will be also be on the backside as well; you need these lines for folding and sewing later.

Fix with a warm iron. And yes, my ironing board cover looks this crappy. I go through a new one about every two months, because I am so hard on it!

Fold over the first column inward right sides together (RST). Make sure your "fold line" from the gridded fleece or paper is exactly in the middle when folding over. This is to ensure you sew an accurate line.

Take it over to your sewing machine. Reduce your stitch length. I reduced mine from 2.5 to 1.5 stitch length. This is to keep the seam together when press the seam open to reduce bulk.

Feed your sewing machine. Sew an exact scant 1/4 of an inch.

When you are finished with the first vertical column, flip your piece over front to back. Fold your next column inward matching up the line again which becomes a guide for sewing. Sew the next seam.

Flip front to back. Fold next column inward using your line on fleece as a folding line. Sew.

Continue sewing, flipping and creasing until all columns are finished. If you forget to flip your piece, don't worry, it will just  bow to one side. ; )

This is what you get when all columns are finished.

Cut your seams open by cutting the back of the seam allowance as shown. Repeat for all columns.

Finger press and then set all seam allowances OPEN with a hot iron with the steam off. Sorry about that ironing board again. It really looks used up!

Now lets work on those rows.

Fold your first row inward RST, making sure you see the "fold line."

Sew using your fold line as a guide. Pull your piece slightly taut as you sew.

I find it easier to keep the rows straight by lining up the outer edges and pinning in place a couple of times. Flip and repeat sewing as you did in the columns.

This is what it looks like when you finish all rows.

Now it's time to cut open the seams for the rows.

Press all of the seams open. Press the hell out of the front so it lays flat. Leave all paper and fleece inside. Do not attempt to tear it out. It won't hurt the pincushion but only stabilize it more. Square up and trim to 3 1/2 inches or whatever you get. (Mine measured 3 1/4 inches in the end.)

Trim backing fabric to the same size.

Lay Front on the backing fabric, RST. Sew around pincushion leaving an opening for flipping. Backstitch at start and stopping points.

Trim the corners and flip right side out. Use a pair of scissors to get the points sharp.

Thread a hand stitching needle with thread matching the backing fabric. Start to stitch the opening closed using a blindstitch. Stitch half of the opening closed. Carefully fill the pincushion using the funnel and cornmeal or other grain; shake some grain into the pincushion shaking it down and pushing into the corners with the small funnel. (I used polenta or cornmeal.) Continue sewing the opening shut and adding more grain until the pin cushion is nice and plump.

It is now finished! The possibilities of this technique are endless I look forward to seeing what you make with it. Please share with us all using the hashtag #sewpixelplay.

I hope you enjoyed this Sew Pixel Play Tutorial.

If you have any questions, please don't hesitate to ask. You can always email me directly. Thanks for stopping by!